The Independent Global Source for the Flexible and Printed Electronics Industry.

Breaking News | Experts Opinion | Flexible and Printed Electronics | Sensors and Wearables

IDTechEx Reports Smart Building Opportunities for Printed Sensors

Smart buildings promise automated control of the buildings’ operations, along with integrated technology for human-machine interactions, per IDTechEx.

IDTechEx 01.05.21

Printed, Flexible Electronics: Key Technology Highlights in 2020 from IDTechEx

IDTechEx outlines three of the most exciting technological highlights in the sector.

IDTechEx 12.03.20

Breaking News | Conductive Inks and Coatings | Electronic Materials | Flexible and Printed Electronics | Research Reports

Printed Electronic Materials Market Forecasted to Reach $6.9 Billion by 2031: IDTechEx

Semiconductors (primarily for OLEDs) and component attachment materials to be the largest materials markets in printed/flexible electronics by 2031.

IDTechEx 11.26.20

Breaking News | Experts Opinion | Flexible and Printed Electronics

Printed, Flexible Electronics: Key Technology Highlights in 2020 from IDTechEx

Printed/flexible electronics is a constantly evolving area with extensive scope for innovation.

IDTechEx 11.17.20

Breaking News | Experts Opinion | Photovoltaics

IDTechEx: CIGS is 'Rock Star' of Photovoltaics

"CIGS will not take over the world, but it contributes to solar beating wind because of faster cost reduction and no moving parts," IDTechEx writes.

IDTechEx 07.20.20

Breaking News | Printed Batteries | Research Reports

Flexible Batteries Pivot From Push to Pull, Creating $500 Million Market in 2030: IDTechEx

Expected to grow from $22 million in 2020 to $109 million in 2025.

IDTechEx 07.09.20

Flexible Hybrid Electronics: New IDTechEx Report on Innovation Trends, Opportunities, Challenges

The flexible hybrid electronics market could be worth $3 billion by 2030.

IDTechEx 04.21.20

Displays and Lighting | Research Institutions | Sensors and Wearables | Universities

innoLAE 2020 Showcases Possibilities of Large-Area Electronics

Speakers highlight opportunities in biosensors, wearables for healthcare and more.

Online Exclusives Sean Milmo, European Editor 04.13.20

Breaking News | Displays and Lighting | Experts Opinion | Research Reports | Semiconductors and Quantum Dots

Quantum Dots: Progress, Challenges, Future in LED Lighting

Dr. Khasha Ghaffarzadeh, research director at IDTechEx, discusses the challenges and prospects faced by QDs in the general lighting market.

Dr. Khasha Ghaffarzadeh, Research director, IDTechEx 04.07.20

Breaking News

IDTechEx Show! in Berlin Postponed

Events Director Chris Clare provided an update.

03.27.20

Breaking News

Coronavirus Disrupts Trade Show Circuit

Here’s a list of events that have been canceled or postponed due to COVID-19.

Online Exclusives Printed Electronics Now staff 03.11.20

Breaking News | Sensors and Wearables

Innovative Technologies Drive Growth in Medical Sensors Market

The ability to provide constant monitoring of diseases through wearables is leading to new opportunities.

Online Exclusives Sean Milmo, European Editor 02.26.20

Conductive Inks and Coatings | Flexible and Printed Electronics | Printed Circuit Boards/Membrane Switches/In Mold Electronics | Sensors and Wearables | Smart Cards and Packaging

Commercialization Drives Growth in the Conductive Ink and Materials Market

...

David Savastano, Editor 02.21.20

Breaking News | Printed Circuit Boards/Membrane Switches/In Mold Electronics | Research Reports

IDTechEx Research Analyzes In-Mold Electronics: Starting Simple to Reach $1 Billion

IME will one day become a well-established process with a well-developed ecosystem and a mature, easy-to-use design-to-product workflow, per IDTechEx.

IDTechEx 02.18.20

Breaking News | Flexible and Printed Electronics | Printed Batteries

Thinfilm Updating Corporate Strategy

Focused on design, development, and production of battery solutions targeting existing market demand with differentiated solutions to power wearables, sensors.

02.04.20

Breaking News | Flexible and Printed Electronics | Printed Circuit Boards/Membrane Switches/In Mold Electronics | Sensors and Wearables

Printed Electronics: Opportunities are Coming 'Thick,' 'Fast'

Printed Electronics Europe takes place on May 13-14 in Berlin.

IDTechEx 01.20.20

Breaking News | Flexible and Printed Electronics | Research Institutions

CPI Hosting innoLAE Industry Day 2020

The innoLAE Industry Day 2020 event will take place on Jan. 20 in Cambridgeshire and will feature talks from prominent industry leaders.

01.06.20

Breaking News | Graphene, Perovskites and Carbon Nanotubes | Sensors and Wearables

IDTechEx Show! Announces Graphene Award Winner

Its application was on "Selective CNT Gas Sensors."

12.09.19

Mergers and Acquisitions | RFID and NFC

Avery Dennison Acquires Smartac’s RFID Inlay Business

Addition strengthens Avery Dennison’s position in industrial segment, also adds to its HF and LF capabilities.

Online Exclusives David Savastano, Editor 12.04.19

IDTechEx Show! USA 2019 Highlights Emerging Applications

Leaders in automotive, retail and industrial fields relate their experiences and needs for flexible and printed electronics.

Online Exclusives David Savastano, Editor 11.26.19

Breaking News

New Products at IDTechEx Show! USA 2019

NFC-enabled wine bottles, in-mold electronics among the projects seen at booths.

Videos

Breaking News | Sensors and Wearables

IDTechEx Sensors USA 2019 Award Winner Announced

Each year a company is given the Best Innovative Sensor Technology award for its development and achievement in the sensor innovation and commercialization area

11.26.19

Scenes from IDTechEx LIVE! 2019

IDTechEx's two-day conference in Santa Clara, CA featured presentations, tabletop exhibits and more.

Slideshows David Savastano, Editor 11.25.19

Breaking News | Film, Paper, Glass and Substrates | Flexible and Printed Electronics

IDTechEx Printed Electronics USA 2019 Award Winners Announced

The next IDTechEx Printed Electronics award ceremony will be held Berlin in Germany, May 13-14, 2020.

11.22.19

IDTechEx Show! USA 2019 Looks Ahead at Printed and Flexible Electronics

Smart packaging, in-mold electronics, flexible displays and more are among the topics for today’s sessions.

Online Exclusives David Savastano, Editor 11.20.19

Breaking News | Flexible and Printed Electronics

Women in STEM, China and Materials are Focus of Today's Exhibition Theater Talks

Companies will look at key markets like materials for flexible electronics, as well as opportunities in China and for Women in STEM.

11.20.19

GM, Faurecia, Airbus and More Headline IDTechEx Show! USA 2019

Major corporations discuss applications, uses for flexible and printed electronics sensors, wearables and more.

Online Exclusives David Savastano, Editor 11.19.19

3D Printing | Breaking News | Flexible and Printed Electronics | Manufacturing | Printing

Optomec Extends Production Run Times for 3D Printed Electronics Solutions

Optimized the mist delivery mechanisms on Aerosol Jet to allow eight-hour run time.

11.19.19

Breaking News | Flexible and Printed Electronics | Manufacturers News | Suppliers News

IDTechEx Hosts Short Sessions Today

Topics range from Flexible and Structural Electronics: Manufacturing to Sensors, Systems and IoT.

11.19.19

3D Printing | Flexible and Printed Electronics

Printed Electronics USA Event Info

...

11.14.19

Breaking News | Conductive Inks and Coatings | Graphene, Perovskites and Carbon Nanotubes | Sensors and Wearables

PPG Presents Papers, Highlight Mobility, Electronic Materials Solutions at IDTechEx 2019

For electronic materials applications, PPG will showcase polymer-thick-film circuit materials that include printed conductive, dielectric and resistive inks.

11.13.19

Conductive Inks and Coatings | Contract Manufacturing/Printing | Manufacturers News | Printed Circuit Boards/Membrane Switches/In Mold Electronics | Suppliers News

In-Mold Electronics Makes Gains in Automotive, Appliances and More

IME specialists report that interest in the technology is dramatically increasing.

David Savastano, Editor 11.12.19

Conductive Inks and Coatings | Contract Manufacturing/Printing | Flexible and Printed Electronics | Manufacturers News | Suppliers News

Smart Packaging Continues to Find New Opportunities

Widespread usage remains on the horizon, but more pilot projects are advancing.

David Savastano, Editor 11.12.19

Breaking News | Research Reports | RFID and NFC

20.1 Billion RFID Tags to Be Sold in 2019: IDTechEx

Revenue growth for RAIN RFID from 2018 to 2019 is 15%.

Raghu Das, IDTechEx CEO 11.12.19

Breaking News | Printed Circuit Boards/Membrane Switches/In Mold Electronics

In-Mold Electronics Market Will Take Off in 2020: Here's Why

Dr. Richard Collins highlights some of the key indicators and market opportunities.

Dr. Richard Collins, Senior Technology Analyst at IDTechEx 11.08.19

Commercialization is Focus for PE USA 2019

General Motors, Faurecia, Airbus, Cisco, LG Electronics and Osram among the presenters discussing opportunities for flexible and printed electronics.

Online Exclusives David Savastano, Editor 11.06.19

Breaking News | Conductive Inks and Coatings | Sensors and Wearables

IDTechEx Announces Launchpad Winners

All winners will be showing a new working prototype or product, many for the first time.

Kim Smith, Events Administrator 10.15.19

Breaking News | Sensors and Wearables

BeBop Sensors Launches Forte Data Glove Enterprise Edition

Targeted to the enterprise market, one-size-fits-all Forte Data Glove Enterprise Edition provides true real-time haptic feedback.

09.06.19

Airbus Shows Possibilities of Flexible Electronics in Aerospace

Potential uses include wiring, signage, sensors, windows and more.

David Savastano, Editor 08.28.19

Breaking News | Printed Circuit Boards/Membrane Switches/In Mold Electronics

In-Mold Electronics: Challenges in Every Step?

IDTechEx's Dr. Khasha Ghaffarzadeh discusses some of the challenges on the way towards the production of a successful IME product.

Dr. Khasha Ghaffarzadeh, Research Director at IDTechEx 08.22.19

Adhesives, Barriers and Encapsulants | Breaking News

Barrier Films, Thin-film Encapsulation: Key technology, Market Trends

IDTechEx provides a brief overview of the evolution of the technology to its current status and considers some of the latest technology trends.

IDTechEx 07.23.19

Displays and Lighting | Flexible and Printed Electronics

TF Massif Creates Opportunities in ‘Extra-Large’ Flexible Electronics

LED eBanners find success at trade shows and conferences, sporting events, and point of purchase (POP) signage in retailers.

Online Exclusives David Savastano, Editor 06.05.19

Breaking News | Flexible and Printed Electronics | Sensors and Wearables

BeBop Sensors Wins Red Herring’s Top 100 North America 2019 Award

BeBop Sensors has also won numerous other awards, including the TIME Magazine Best Inventions Award.

05.22.19

Breaking News | Flexible and Printed Electronics

FLEX Taiwan 2019 Showcases Flexible Electronics Innovations and Opportunities

FLEX Taiwan will be held May 29-30, 2019 and feature 17 keynote speeches.

04.22.19

Breaking News | Displays and Lighting | Flexible and Printed Electronics | Research Institutions

ESJET Printing Technology for Large Area Active Devices Awarded

ESJET printing is a new printing technology for large-scale, solution-processed displays and enables higher resolution and drop on demand printing.

04.16.19

Adhesives, Barriers and Encapsulants | Breaking News | Printing | Research Institutions | Smart Cards and Packaging

IDTechEx Printed Electronics Europe 2019 Award Winners Announced

Four companies were honored for achievements in developing and commercializing printed electronics technologies.

04.12.19

Breaking News | Experts Opinion | Smart Cards and Packaging

Smart Packaging Counteracting the Lost Moment of Truth

IDTechEx Research finds that electronic smart packaging will become a $1.8 billion market in 2029.

Raghu Das, CEO, IDTechEx 04.11.19

Breaking News | Flexible and Printed Electronics | RFID and NFC

PragmatIC’s Order-book Exceeds 20 Million Units

Rapid adoption of flexible integrated circuits across 3 continents.

04.09.19

Commercialization is Focus of PE Europe 2019

Airbus, ABInBev, Diageo, Microsoft, Google, Samsung, Panasonic, Continental and more are among the presenters at this year’s conference.

Online Exclusives03.27.19

New Opportunities in the Automotive Industry

Automotive manufacturers are developing new uses for flexible electronics, including sensors, in-mold electronics, displays and lighting.

Dave Savastano, Editor 03.07.19

FOLLOW:

Search Results for 'idtechex'

Buyers Guide Companies

Fall 2020

follow us