09.15.21
Counterfeit-proof product protection and resilient supply chains are the goals of the Fraunhofer SmartID project. The Fraunhofer Institutes for Applied Polymer Research IAP, for Secure Infor-mation Technology SIT and for Open Communication Systems FOKUS are developing a novel marking system that can determine the authenticity of products via smart devices even while being offline, i.e. without access to a database.
SmartID will be embedded in existing track & trace infrastructures and can be printed on products or their packaging using commercially available printing processes.
Counterfeit or uncertified products circulate in large numbers in the market, among them FFP2 masks. Consumers often have no ability to verify the authenticity of a product. In the case of coun-terfeit medical products and pharmaceuticals, cosmetics and even food there can also be serious consequences for health.
Product Authentication from Producer to the End Customer
Comprehensive product protection can only be achieved through a system that ensures verifiability of product authenticity from the producer through customs, wholesalers and retailers to the end customer.
"This is what we are striving for in the SmartID project. Everyone in this chain should be able to authenticate a product securely. We are taking advantage of the fact that many people have a smart device these days," said Dr. Tobias Jochum, who coordinates the project and works as a specialist in anti-counterfeiting at the Hamburg Center for Applied Nanotechnology CAN, a research divi-sion of the Fraunhofer IAP.
In SmartID, each product will be labeled as unique and authentic. To this end, the scientists in-volved are bringing together materials science expertise with cutting-edge software.
Fraunhofer IAP is developing novel materials for counterfeit-proof labeling that can be detected via smart devices. The Fraunhofer Institutes SIT and FOKUS are developing special software for reading and encrypting this physical marking. Further, an app will be developed allowing the cus-tomers to verify the product via their smart devices.
Use of Existing Track & Trace Infrastructure, but Without Database
With their identification, the partners are building on existing track & trace barcodes. SmartID is designed so that QR codes, Data Matrix codes and all other ISO-normed barcodes can be used and read using a smart device. But contrary to the conventional approach, users can also check the au-thenticity verification without database matching.
"This offers several advantages: On the other hand, with SmartID we avoid various IT security and data protection challenges that arise when using a central database, as well as the high costs associ-ated with installing, commissioning and maintaining databases," said Jochum.
In the first phase of the project, the partners are focusing on establishing secure and unique identi-fiers on product packaging and optimizing processes in terms of costs. One goal here is to print SmartID identifiers on packaging using conventional printing technologies. In further develop-ments, SmartID could also be integrated directly into products.
Strong Partners from Industry
SmartID is supported by an industrial advisory board that brings different expertise along the entire value chain. The partners include REA Elektronik GmbH, DNV, Domino Printing UK and the Mechanical Engineering Industry Association.
"While in the past almost exclusively IT solutions were established, SmartID also takes into ac-count the physical component of counterfeit protection and combines it with the best possible IT security,” said Steffen Zimmermann of the Mechanical Engineering Industry Association.
SmartID will be embedded in existing track & trace infrastructures and can be printed on products or their packaging using commercially available printing processes.
Counterfeit or uncertified products circulate in large numbers in the market, among them FFP2 masks. Consumers often have no ability to verify the authenticity of a product. In the case of coun-terfeit medical products and pharmaceuticals, cosmetics and even food there can also be serious consequences for health.
Product Authentication from Producer to the End Customer
Comprehensive product protection can only be achieved through a system that ensures verifiability of product authenticity from the producer through customs, wholesalers and retailers to the end customer.
"This is what we are striving for in the SmartID project. Everyone in this chain should be able to authenticate a product securely. We are taking advantage of the fact that many people have a smart device these days," said Dr. Tobias Jochum, who coordinates the project and works as a specialist in anti-counterfeiting at the Hamburg Center for Applied Nanotechnology CAN, a research divi-sion of the Fraunhofer IAP.
In SmartID, each product will be labeled as unique and authentic. To this end, the scientists in-volved are bringing together materials science expertise with cutting-edge software.
Fraunhofer IAP is developing novel materials for counterfeit-proof labeling that can be detected via smart devices. The Fraunhofer Institutes SIT and FOKUS are developing special software for reading and encrypting this physical marking. Further, an app will be developed allowing the cus-tomers to verify the product via their smart devices.
Use of Existing Track & Trace Infrastructure, but Without Database
With their identification, the partners are building on existing track & trace barcodes. SmartID is designed so that QR codes, Data Matrix codes and all other ISO-normed barcodes can be used and read using a smart device. But contrary to the conventional approach, users can also check the au-thenticity verification without database matching.
"This offers several advantages: On the other hand, with SmartID we avoid various IT security and data protection challenges that arise when using a central database, as well as the high costs associ-ated with installing, commissioning and maintaining databases," said Jochum.
In the first phase of the project, the partners are focusing on establishing secure and unique identi-fiers on product packaging and optimizing processes in terms of costs. One goal here is to print SmartID identifiers on packaging using conventional printing technologies. In further develop-ments, SmartID could also be integrated directly into products.
Strong Partners from Industry
SmartID is supported by an industrial advisory board that brings different expertise along the entire value chain. The partners include REA Elektronik GmbH, DNV, Domino Printing UK and the Mechanical Engineering Industry Association.
"While in the past almost exclusively IT solutions were established, SmartID also takes into ac-count the physical component of counterfeit protection and combines it with the best possible IT security,” said Steffen Zimmermann of the Mechanical Engineering Industry Association.
