3D Printing

Equipment Manufacturers Report Continued Growth for Flexible Electronics

The automotive and healthcare markets remain rife with opportunity.

Anthony Locicero 02.21.20

Printed Electronics Now’s International Suppliers’ Directory

David Savastano 11.12.19

Vast Markets Available for Flexible, Printed Electronics Manufacturers to Explore

Semiconductors, displays, OLED, QLED, and wearables are among them.

Anthony Locicero 03.09.18

Printed Electronics Now’s International Suppliers’ Directory

David Savastano 11.10.17

Recent Innovations in the Equipment Market

Fast growth and high commercialization are resulting in gains for equipment manufacturers.

Catherine Diamond 03.23.17

The Conductive Ink Market

As products reach commercialization, the $2.3 billion conductive ink market is poised to grow further.

David Savastano 03.31.16

3D Printing | Electronic Materials | Flexible and Printed Electronics | Nanomaterials | Universities

Universities are Conducting Cutting-Edge Research on Flexible and Printed Electronics

The field of flexible and printed electronics encompasses many disciplines, and universities are adding their own insights.

David Savastano 11.09.15

3D Printing | Breaking News | Research Institutions

NREL Takes Novel Approach to 3D-Printed Water Power Prototypes

NREL and Montana State University researchers explore the potential for rapid prototyping using additively manufactured composite molds.

Alexis Powers 04.21.21

3D Printing | Breaking News | Mergers and Acquisitions

Nano Dimension Acquires DeepCube Ltd.

AI will drive its 3D-AI/ML distributed digital fabrication applications, according to Nano Dimension.

Anthony Locicero 04.20.21

3D Printing | Breaking News | Research Reports

Lux Research: 3D Printing Market to Reach $51 Billion in 2030

The value of 3D-printed parts will rise at a 15% CAGR over the next decade.

Lux Research 04.12.21

3D Printing | Breaking News | Energy Curing/Sintering | Universities

2021 RadLaunch Award Winners Announced

Will be presented during an Awards Zoom Program, 3:00-4:00 p.m. EDT on April 28, 2021.

Anthony Locicero 04.09.21

3D Printing | Breaking News | Mergers and Acquisitions | Suppliers News

Toppan Acquires Brookman Technology

Strengthens position for entry into the 3D image sensing market with acquisition of image sensor developer.

David Savastano 03.18.21

3D Printing | Breaking News

Voxel8, Eddy Ricami Bringing Advanced Additive Manufacturing Technology to High Fashion Industry

Voxel8 said its ActiveLab system offers a complete turnkey solution, including hardware, software and materials, for printing functional features on textiles.

Anthony Locicero 03.10.21

3D Printing | Breaking News

ALTANA Completes Acquisition of TLS Business with Metal Powders for 3D Printing

The business will operate under the name ECKART TLS GmbH as of immediately.

Anthony Locicero 02.19.21

3D Printing | Breaking News | Displays and Lighting

trinamiX Introduces 3D Imaging Solution Behind OLED

trinamiX is the first company to bring 3D face authentication behind OLED displays of devices.

Anthony Locicero 02.01.21

3D Printing | Breaking News

Arkema Takes Part in FORMNEXT Connect 2020

To present its latest innovations in specialty materials for all major 3D printing technologies.

Printed Electronics Now staff 11.06.20

3D Printing | Breaking News | Flexible and Printed Electronics | Manufacturing

Optomec Delivers 3D Electronics Printer for Medical Device Production

New Aerosol Jet system is optimized for industrial manufacturing.

Printed Electronics Now staff 11.03.20

3D Printing | Breaking News | Research Institutions

PARC Selects AlphaSTAR’s GENOA 3DP for AM Simulation

Will be used on ARPA-E’s DIFFERENTIATE Program.

Printed Electronics Now staff 10.21.20

3D Printing | Breaking News

Henkel, Carbon Combining Materials, Printing Expertise for High-performance Additive Manufacturing

Henkel expands its relationship with Carbon to further develop the industrial 3D printing market.

Printed Electronics Now staff 10.19.20

3D Printing | Breaking News | Flexible and Printed Electronics | Personnel

Nano Dimension Hires Dr. Joseph Kaplun

Appointed as the company’s chief technology officer – Materials and VP of R&D and Product Development.

Printed Electronics Now staff 09.22.20

3D Printing | Breaking News | Mergers and Acquisitions

ALTANA Expands Industrial 3D Printing Portfolio with Acquisitions

Expansion of ALTANA’s ECKART division with innovative solutions for metal-based 3D printing.

Printed Electronics Now staff 09.14.20

3D Printing | Breaking News | Research Institutions | Sensors and Wearables

ORNL, FEMP Collaborate to Design, Build, Demonstrate Smart Wall

ORNL researchers demonstrated a first-of-its-kind smart wall that combines advanced manufacturing, building and power electronics innovation.

Jennifer Burke 09.02.20

3D Printing | Breaking News | Research Institutions

ORNL: Novel 3D-printed Device Demonstrates Enhanced Capture of Carbon Dioxide Emissions

ORNL’s device focuses on a key challenge in the conventional absorption of carbon using solvents.

Printed Electronics Now staff 08.19.20

3D Printing | Breaking News

Arkema Invests in Continuous Composites

To rapidly advance the development of 3D composite manufacturing, a groundbreaking innovation for strong, lightweight structures.

Printed Electronics Now staff 07.30.20

3D Printing | Breaking News

Nexa3D, Henkel Commercialize High Impact, Durable Material for Medical, Athletic Devices

xMED412, a polypropylene-like material that is ideal for manufacturing a variety of biocompatible, medical and wearable devices, is commercially available.

Printed Electronics Now staff 07.28.20

3D Printing | Breaking News | Electronic Materials

Evonik Opens U.S. 3D Printing Technology Center

Located in Austin, Texas, it comprises application technology lab with 3D printers and processing area, R&D lab, production rooms and associated office areas.

Printed Electronics Now staff 07.17.20

3D Printing | Breaking News | Research Reports

3D Printing Materials Market Worth $4.5 billion by 2025: MarketsandMarkets

Forecasted to grow at a CAGR of 23.5% between 2020 and 2025.

MarketsandMarkets 07.16.20

3D Printing | Breaking News

Sculpteo, Forward AM by BASF Boost Production Capacities

Add three 3D printing material lines for mobility.

Printed Electronics Now staff 07.01.20

3D Printing | Breaking News

Henkel, Origin Collaborate to Meet Demand for COVID-19 NP Swabs

Henkel's and Origin's first FDA compliant, sterile, 3D printed nasopharyngeal test swab now shipping.

Printed Electronics Now staff 06.18.20

3D Printing | Breaking News

Paxis, Sartomer to Develop Advanced Materials for New Additive Manufacturing Process Technology

Designed to solve the limitations of existing liquid-resin-based technologies.

Printed Electronics Now staff 06.10.20

3D Printing | Breaking News

OECHSLER, HP Partner to Scale 3D Printing Applications for Industry Leaders

Collaborate to accelerate design and mass production of 3D printed parts across automotive, appliances, medical, and other industries.

Printed Electronics Now staff 06.08.20

3D Printing | Breaking News

HP, BASF Expand Industrial Alliance to Advance Digital Manufacturing

Leaders deliver first-of-its-kind polypropylene (PP) for industrial additive manufacturing.

Printed Electronics Now Staff 06.05.20

3D Printing | Breaking News

First 3D-printed House in Czech Republic Being Built in June

The Prvok house will be printed using a robotic arm through which the special material flows directly to the destination.

Printed Electronics Now staff 05.29.20

3D Printing | Breaking News | Manufacturing

Optomec Announces Aluminum 3D Printing Capability Using Directed Energy Deposition

Can be used to deposit any aluminum alloy, including those recently developed specifically for improved properties with AM processing.

Printed Electronics Now staff 05.07.20

3D Printing | Breaking News

Mimaki USA Expands 3D Printer Offerings with  3DGD-1800 Model

Features gel dispensing printing technology.

04.01.20

3D Printing | Breaking News

Shipparts.com, Nanyang Polytechnic, ABS Sign Research Collaboration Agreement

Agreement aims to prove standards for certification of metallic components produced by NYP’s Additive Manufacturing Innovation Centre for maritime applications.

03.30.20

3D Printing | Breaking News

HP Inc., Partners Mobilize 3D Printing Solutions to Battle COVID‐19

Many 3D design files to be made freely available to accelerate critical parts production.

03.25.20

3D Printing | Breaking News | Manufacturing

nScrypt Demonstrates Rugged 3D Manufacturing System for Secretary of the Army

LTC Jason Barnhill of the US Military Academy's Department of Chemistry and Life Science demonstrated the printing of an orthopedic screw on the nRugged system.

03.09.20

3D Printing | Breaking News | Personnel

Xerox Names Tali Rosman as VP, 3D Business

Rosman joins Xerox from NICE, where she was VP and head of business operations for the Americas.

02.28.20

3D Printing | Breaking News

Sartomer Presenting Advances in 3D Printing of Composites at JEC World

JEC World 2020 takes place March 3-5 (Paris-Villepinte).

02.21.20

3D Printing | Breaking News | Flexible and Printed Electronics

Printed Electronics in 3D: Ready for Mass Market

LOPEC focusing on functional materials and equipment.

02.20.20

3D Printing | Breaking News | Research Reports

GVR: Global 3D Printing Market Size was $11.58 Billion in 2019

Globally, 1.42 million units of 3D printers were shipped in 2018 and this number is expected to reach 8.04 million units by 2027.

02.10.20

3D Printing | Breaking News | Energy Curing/Sintering

RadLaunch Announces Start-up Technology Accelerator Class of 2020

The RadLaunch 2020 class will all give presentations at RadTech 2020 (March 8-11, 2020 in Orlando, FL).

01.23.20

3D Printing | Breaking News | Personnel

Voxel8 Welcomes Dr. Friedrich von Gottberg as President/CEO

Travis Busbee, cofounder and previous CEO, will assume the full-time role of chief technology officer.

01.09.20

3D Printing | Breaking News | Research Reports

3D Printing Materials Market to Grow at 23.9% CAGR Through 2025: GVR

The global 3D printing materials market size was estimated at $845.7 million in 2018.

12.16.19

3D Printing | Breaking News | Manufacturing

Optomec 3D Metal Printing Technology Chosen by Navajo Technical University for NASA Mission

Will collaborate on additive manufacturing research around directed energy deposition (DED) of bi-metallic parts for NASA applications.

12.12.19

3D Printing | Breaking News

Deko 3D by Sepia Enters Sporting Arena Following Massivit 3D Investment

“3D printing provides a unique way for brands to reach and interact with their audience,” said Erez Zimerman, CEO of Massivit 3D.

12.04.19

3D Printing | Breaking News | Personnel

Carbon Appoints Ellen Kullman President and CEO

Additionally, Dr. Joseph DeSimone named executive chairman.

11.29.19

3D Printing | Breaking News | Energy Curing/Sintering

RadTech Announces 2020 Conference Program

The RadTech UV+EB Technology Expo and Conference will take place March 8-11, 2020, at the Disney Coronado Springs, Orlando, FL.

11.22.19

3D Printing | Breaking News

EnvisionTEC, Sartomer Introducing E-Aquasol 3D Printing Resin at Formnext 2019

Designed for use on EnvisionTEC’s proprietary cDLM 3D printing platform and incorporates Sartomer’s N3xtDimension UV-curable resin technology.

11.20.19

3D Printing | Breaking News | Flexible and Printed Electronics | Manufacturing | Printing

Optomec Extends Production Run Times for 3D Printed Electronics Solutions

Optimized the mist delivery mechanisms on Aerosol Jet to allow eight-hour run time.

11.19.19

3D Printing | Breaking News | Mergers and Acquisitions

BASF Acquires 3D Printing Service Provider Sculpteo

Acquisition offers access to new materials and technologies for customers of BASF and Sculpteo.

11.19.19

3D Printing | Breaking News | Electronic Materials

Henkel Launches First Photo-reactive 3D Printing Material

Meets aerospace fire, smoke and toxicity safety standards.

11.18.19

3D Printing | Breaking News

Arkema Inaugurates Global Center of Excellence for 3D Printing in Normandy

Dedicated to additive manufacturing based on high-performance polymers.

11.18.19

3D Printing | Breaking News

dp polar, ALTANA Presenting 3D Printing Solution for Industrial Series Production

AMpolar i2 is the first 3D printing system with a continuously rotating print platform.

11.14.19

3D Printing | Breaking News

Henkel, Shapeways Partner for Large-scale Industrial Loctite 3D Printing Solutions

The company has launched differentiated next-generation resins under the Loctite brand.

11.13.19

3D Printing | Breaking News

BASF 3D Printing Solutions Exhibits Industrial Additive Manufacturing Solutions

Will be at Formnext 2019 (Booth D21, Hall 12.1 ) under a new brand name: Forward AM.

11.13.19

3D Printing | Breaking News

Volkswagen Hits Milestone in Journey to Mass Production with HP Metal Jet

Production run of more than 10,000 high-quality parts produced for the ID.3 launch event.

11.06.19

3D Printing | Breaking News | Manufacturing

Optomec Delivers 500th Industrial 3D Printer

Increased adoption in both metal and electronics additive manufacturing.

11.05.19

3D Printing | Breaking News | Research Institutions | Sensors and Wearables

ORNL Receives 5 2019 R&D 100 Awards

Winners will be honored at the 57th annual R&D 100 Conference on Dec. 5.

Abby E. Bower 11.01.19

3D Printing | Breaking News | Research Institutions

CPI Announces £2.3 Million Project for UK SMEs

The IMPACT project is funded by the European Regional Development Fund.

10.30.19

3D Printing | Breaking News

Armani Uses Colorzenith’s Massivit 1800 to Leverage 3D Printing for Billboard Ads

Produced giant dimensional billboards promoting its latest fashion and accessories collection.

10.28.19

3D Printing | Breaking News | Manufacturing | Personnel

Tim Sheehan Joins nScrypt Sales Team

Sheehan most recently served as the VP of global sales & customer care for Israel-based Nano Dimension.

10.08.19

3D Printing | Breaking News | Research Institutions

3D Printing of Resins: Fast Curing with UV LED

Aim to develop a 3D printing process that enables the simple and efficient production of 3D components using cost-effective UV-LED curable reactive resins.

10.04.19

3D Printing | Breaking News

Massivit 3D Showcasing Large Format 3D Printing at Printing United 2019

Event takes place in Dallas from Oct. 23-25.

09.26.19

3D Printing | Breaking News | Manufacturing

USF, nScrypt Show How 3D Printed Circuit Structures Can Replace PCBs

Part of an SMTA white paper where the authors predict that PCSs will eventually replace PCBs as electronics are reshaped and reformed.

09.24.19

3D Printing | Breaking News | Financial News | Manufacturing

Optomec Reports 40% Growth in Q2, First Half 2019 Revenue

Increases driven by production applications in metal and electronics additive manufacturing.

09.24.19

3D Printing | Breaking News | Research Institutions

ORNL’s Craig Blue Elected SME 2019 Fellow

Blue was one of six fellows from industry, government and academia elected nationwide.

08.28.19

3D Printing | Breaking News

nScrypt Delivering Factory in a Tool to Australian Defense Department

Will be outfitted with a SmartPump microdispensing tool head, nFD material extrusion tool head, Pick and Place and nMill tool heads.

08.12.19

3D Printing | Breaking News | Research Reports

3D Printing Market Worth $42.9 Billion by 2025: MarketsandMarkets

Forecasted to register a CAGR of 23.3%.

07.11.19

3D Printing | Breaking News | Manufacturing

University of Pardubice Picks nScrypt’s 3Dn Tabletop FiT to Support Research

The University selected a 3Dn-Tabletop (Dual-Head), multi-material, precision ball screw motion platform.

07.09.19

3D Printing | Breaking News

Sartomer, Massivit 3D Print French Women's Soccer Star

The resulting display is 1.7 meters (5.5 feet) tall and was 3D printed in just 11 hours.

06.28.19

3D Printing | Breaking News | Flexible and Printed Electronics | Manufacturing

Samsung Electronics Selects Optomec’s Aerosol Jet for Next-Generation Electronics Production

Electronics producers are now using the Aerosol Jet process to print RF interconnects.

06.24.19

3D Printing | Breaking News

HP Reveals 'Bold' New Commitments for Driving Circular, Low‐Carbon Economy

Sustainable Impact programs drove more than $900 million of new revenue, a 35% increase year-over-year.

06.20.19

3D Printing | Breaking News | Research Reports

3D Printing Market Worth $34.8 Billion by 2024: MarketsandMarkets

At $9.9 billion in 2018.

02.28.19

3D Printing | Breaking News

BASF Invests in Alchemist Accelerator

BASF accelerates its outreach towards technologies like artificial intelligence, internet of things and robotics.

02.21.19

3D Printing | Breaking News | Manufacturing

Arkema Showcases Collaborative Innovations in 3D Printing Technologies at TCT Asia 2019

TCT Asia took place in Shanghai Feb. 21-23.

02.21.19

3D Printing | Breaking News

Massivit 3D Printed 1:1 Concept Car Signals the Future of Concept Prototyping

First full-scale 3D printed concept car to ever be exhibited at Festival Automobile International.

02.20.19

3D Printing | Breaking News | Manufacturing

Air Force Awards nScrypt’s Research Company Phase 2 Contract for 3D printed Conformal Antenna Arrays

Sciperio developed a fully printed phased array antenna for the Air Force in 2016.

02.19.19

3D Printing | Breaking News | Flexible and Printed Electronics | Manufacturing | Suppliers News

Optomec Showcases Production System for Electronics Packaging at IPC APEX

Will have live demonstrations of the company’s Aerosol Jet HD 3D system.

01.29.19

3D Printing | Breaking News | Contract Manufacturing/Printing | Flexible and Printed Electronics

Jabil Advances Additive Manufacturing Market

Integrates engineered materials, 3D printing machines to produce highly functional parts.

01.22.19

3D Printing | Breaking News

Full Scale 3D Printed Concept Car Debuts at FAI

Car is a tribute to rockstar David Bowie (1947-2016).

01.22.19

3D Printing | Breaking News | Mergers and Acquisitions

Evonik Acquires Structured Polymers Inc.

Structured Polymers is an Austin, Texas-based technology startup for 3D printing materials.

01.18.19

3D Printing | Breaking News | Manufacturing | Suppliers News

Optomec, Phillips Federal Partner

Bringing metal additive manufacturing repair solutions to U.S. government agencies.

01.16.19

3D Printing | Breaking News | Research Reports

IDC: Worldwide Spending on 3D Printing Will Reach $13.8 Billion in 2019

By 2022, IDC expects worldwide spending to be nearly $22.7 billion with a five-year compound annual growth rate (CAGR) of 19.1%.

01.09.19

3D Printing | Breaking News | Research Institutions

ORNL: New Composite Advances Lignin as Renewable 3D Printing Material

Lignin is the material left over from the processing of biomass.

12.24.18

3D Printing | Breaking News

HP Opens HP LIFE Center for Entrepreneurship in South Africa

HP pledged to empower 100,000 learners across Africa over the next three years through the HP Foundation’s HP LIFE program.

12.04.18

Fraunhofer Institute, Sirris Investigate Technical Coatings for Additive Manufacturing

Report lacquering and polishing as most efficient technique for surface optimization.

12.03.18

3D Printing | Breaking News | Manufacturing

Optomec Hosts International LENS User Meeting in Austin, TX

Industry leaders and academic institutes collaborate on latest developments in 3D metal printing.

11.30.18

3D Printing | Breaking News | Manufacturing | Personnel | Research Institutions

Kurfess, Smith Join ORNL to Lead Advanced Manufacturing Initiatives

Both are fellows of SME and ASME.

11.28.18

3D Printing | Breaking News | Displays and Lighting | Semiconductors and Quantum Dots

Sartomer Features New Developments in UV/EB Curing Technology at CHINACOAT 2018

CHINACOAT 2018 takes place Dec. 4-6, 2018 in Guangzhou, China.

11.26.18

3D Printing | Breaking News

RadTech Announces Program for BIG IDEAS for UV+EB Technology Conference

BIG IDEAS for UV+EB Technology takes place March 19-20, 2019 in Redondo Beach, CA.

11.26.18

3D Printing | Breaking News | Research Institutions

ORNL Technologies Receive Six R&D 100 Awards

his year’s six honors bring ORNL’s total of R&D 100 awards to 216 since 1963.

11.23.18

3D Structural Electronics: A New Dimension of Mobility

LOPEC 2019 will highlight printed electronic component for the automotive industry.

11.21.18

3D Printing | Breaking News | Suppliers News

BASF, Materialise, Essentium Join to Advance Industrial Additive Manufacturing

BASF leads a Series A investment round with Materialise as one of the co-investors.

11.15.18

Optomec Features Aerosol Jet HD System for High Density Electronics Packaging at PE USA 2018

Aerosol Jet HD System is a compact, configurable R&D to production platform.

11.12.18

3D Printing | Breaking News

ASTM International Additive Manufacturing Center of Excellence Announces First Round of R&D Projects

The initial round of projects target four main areas: Feedstock, process qualification, post-processing, and testing.

09.19.18

3D Printing | Breaking News

WACKER to Open U.S. Printing Lab for Silicone Rubber by End of 2018

The facility will be located at WACKER’s R&D center for silicones in Ann Arbor, MI.

09.19.18

3D Printing | Breaking News

HP, Go 4-D Modernize Process to Create Custom Orthotics

Go 4-D will distribute FitStation powered by HP throughout the North American medical market.

09.17.18

3D Printing | Breaking News | Nanomaterials | Research Institutions

VTT, Carbodeon Speed Up 3D printing with Nanodiamonds

The uDiamond filament, patented by Carbodeon, broadens the applications of 3D printing.

09.13.18

3D Printing | Breaking News

HP Launches Advanced Metals 3D Printing Technology for Mass Production

To accelerate the fourth Industrial Revolution.

09.12.18

3D Printing | Breaking News | Flexible and Printed Electronics | Suppliers News

Optomec LENS Hybrid System Used to Manufacture Dissolvable Metal Components for Medical Applications

The University of Nebraska-Lincoln is using a LENS Hybrid Controlled Atmosphere System to develop dissolvable magnesium.

09.11.18

3D Printing | Breaking News | Flexible and Printed Electronics | Manufacturing | Product Releases

Optomec Announces New Large Format, Low-Cost 3D Metal Printer with Hybrid Machining

New LENS Controlled Atmosphere Hybrid System supports building, repairing, coating and finishing of metal parts up to 860mm.

09.05.18

3D Printing | Breaking News

Evonik Develops PEBA Powder for 3D Printing

Evonik will be at booth 4117 in Hall A4 during FAKUMA, which takes place Oct. 16-20 in Friedrichshafen, Germany.

08.27.18

3D Printing | Breaking News

SGIA 2018: Massivit 3D Demonstrates How Large Format 3D Printing Can 'Grow Your Business'

Massivit will be at booth 2969 at the Expo, which takes place Oct. 18-20.

08.17.18

3D Printing | Breaking News

Mimaki 3DUJ-553 Printer Shortlisted for TCT Awards

Full-color 3D printer voted as a finalist for the Hardware Award – Polymers.

08.08.18

3D Printing | Breaking News | Chemicals, Metals and Powders | Mergers and Acquisitions

BASF Acquires Two Manufacturers of 3D Printing Materials

Adds Advanc3D Materials, Setup Performance under the umbrella of BASF 3D Printing Solutions.

07.04.18

Optomec Showcases Smart Devices Cost Effectively Manufactured Using 3D Printing at Sensors Expo

Will show how products from gas turbine engine blades to consumer handheld devices can be made smart with 3D printed sensors.

06.27.18

3D Printing | Breaking News

Henkel Opens European Hub for 3D Printing Technology

Later this year, Henkel will open two further regional centers for 3D Printing.

06.27.18

3D Printing | Breaking News

New Production-Grade Multi Jet Fusion 3D Printing Center Unveiled in China

New center will provide production-grade applications at scale for major auto, consumer goods and motorcycle customers.

06.19.18

Optomec Report Shows Effectiveness of Directed Energy Deposition

DED found to be 10x faster, 5x less expensive than Power Bed Fusion for building mid-size metal parts.

06.12.18

3D Printing | Breaking News | Electronic Materials

BASF at ACHEMA 2018

High-pressure and surface technology plus 3D printing will be showcased.

06.08.18

3D Printing | Breaking News | Electronic Materials

Arkema Increases Specialty Polyamide Powder Capacities in France

Used particularly in the coatings, composite and 3D printing markets.

06.06.18

LAAS-CNRS Targets R&D Strategic Axis with CeraPrinter F-Serie by CERADROP-MGI

High-end equipment provides users with a flexible solution to design and print complex functional multi-material devices.

06.05.18

3D Printing | Breaking News

Xaar Wins ‘Innovation of the Year’ at 3D Printing Industry Awards

Xaar received the honor for its High Laydown Technology for Material Jetting.

05.24.18

3D Printing | Breaking News | Manufacturing | Printing | Suppliers News

Optomec Showcases Industrial 3D Printing Systems at National Manufacturing Conference in Australia

Highlighting its exhibition will be video presentations of the five axis Aerosol Jet system for printed electronics.

05.09.18

3D Printing | Breaking News | Contract Manufacturing/Printing | Manufacturing

Jabil Realizes Distributed Manufacturing Vision with New Additive Manufacturing Network

Increases 3D printing and manufacturing with expansion into six countries, strategic partnership with HP.

04.25.18

3D Printing | Breaking News | Manufacturing

Optomec Displays Production Systems for 3D Printed Electronics, 3D Printed Metals at RAPID + TCT

Optomec was located in booth 1718.

04.23.18

3D Printing | Breaking News | Personnel

Massivit 3D Appoints Kevin Sykes As President for North America

Appointment is effective immediately.

04.17.18

3D Printing | Breaking News

Henkel Becomes First Global Reseller of HP Multi Jet Fusion 3D Printers

Expansion of partnership for industrial 3D printing solutions

04.13.18

3D Printing | Conductive Inks and Coatings | Flexible and Printed Electronics | Research Institutions | Sensors and Wearables

IDTechEx Names Printed Electronics Europe 2018 Award Winners

Applied Nanodetectors, Fraunhofer IFAM and Nano Dimension receive awards.

04.13.18

3D Printing | Breaking News | RFID and NFC

Identiv Presents Intelligent Transponder Solutions for IoT at RFID Journal LIVE! 2018

The event takes place April 10 – 12, 2018 in Orlando, Fla.

04.09.18

Optomec Showcases Industry First Hybrid Atmosphere Controlled System for 3D Printed Metals

Displayed at the AMUG Conference

04.09.18

3D Printing | Breaking News | Electronic Materials

BASF Develops New Materials for Industrial 3D Printing Applications

Cooperating with Essentium Materials on development and distribution of Ultrafuse plastic filaments.

04.09.18

Optomec Names Jamie Hanson VP Business Development

Hanson is a former machine tool industry COO at Methods 3D.

04.03.18

3D Printing | Breaking News | Energy Curing/Sintering

3D Printing Innovations, Breakthroughs Featured at RadTech 2018 Conference

RadTech is slated for May 7-9, 2018 in Chicago

03.20.18

3D Printing | Breaking News | Chemicals, Metals and Powders

Evonik Plans New Polyamide 12 Complex in Marl, Germany

Strong growth for high-performance polymer polyamide 12 in the automotive sector, the oil and gas industry, and 3D printing

03.16.18

3D Printing | Breaking News | Energy Curing/Sintering

RadTech Announces 2018 Candidates for RadLaunch, UV+EB Technology Accelerator

RadTech 2018 is slated for May 7-9 in Chicago

03.14.18

3D Printing | Breaking News | Printing

Optomec Showcases Affordable Metal Additive Manufacturing Systems

TCT Asia 2018 Expo will be held March 1-3 in Shanghai, China.

02.28.18

3D Printing | Breaking News | Manufacturing | Printing | Suppliers News

Optomec, HUSUN Technologies Partner to Expand Metal Additive Manufacturing Market in China

Alliance will enable sales, service and support of Optomec LENS 3D Solutions in the region

02.26.18

3D Printing | Breaking News | Manufacturing | Suppliers News

Optomec Partners with Tesscorn to Expand Additive Manufacturing Market in India

Tesscorn to distribute Optomec LENS Systems for 3D printed metals, Aerosol Jet Systems for 3D printed electronics.

02.20.18

3D Printing | Breaking News | Chemicals, Metals and Powders

Evonik Opens New Polyamide 12 Powder Plant in Marl, Germany

New facility primarily produces high-performance powders for the 3-D printing market

02.14.18

3D Printing | Breaking News | Flexible and Printed Electronics | Printing | Suppliers News

Optomec Showcases Aerosol Jet 3D Printing Systems at 2018FLEX

Will offer live demonstrations of the Aerosol Jet 200 system.

02.13.18

3D Printing | Breaking News

HP Accelerates 3D Printing with Full Color Platform

Portfolio expansion allows development of functional parts in full color, black or white.

02.05.18

3D Printing | Breaking News | Mergers and Acquisitions | Semiconductors and Quantum Dots

Himax Technologies Acquires Nano 3D Mastering Assets, Related IP and Business

Acquisition brings Himax upstream master tooling capability to supplement the company’s WLO technology.

01.29.18

3D Printing | Breaking News | Research Institutions

Engineering the Future of Manufacturing

Brian Post is building the future of large-scale additive manufacturing at the Manufacturing Demonstration Facility at ORNL.

01.23.18

3D Printing | Breaking News

HP Advancing Digital Transformation of Manufacturing with 3D Printing Expansion in India

Selects partners Imaginarium and Andriotec as country’s first HP Multi Jet Fusion resellers.

01.18.18

Carnegie Mellon Extends Research into 3D Micro-Additive Manufacturing with Optomec System

Developing novel methods to create next generation manufacturing processes for sensors, antennas, energy harvesting devices.

01.09.18

Optomec Hosts Ninth Annual International Aerosol Jet User Meeting

Industry leaders, academic institutes collaborate on latest developments in 3D printed electronics.

11.30.17

Three Canadian Companies Honored at IDTechEx Show!/Printed Electronics USA

Awards won by Memtronik Innovations, Myant & Co. and Voltera.

11.27.17

3D Printing | Breaking News | Flexible and Printed Electronics | Research Institutions

ORNL Wins Nine R&D 100 Awards

ORNL has won 210 awards since 1963.

11.21.17

Optomec Demonstrates Production 3D Printing Technology at Printed Electronics USA

Aerosol Jet 3D printing systems are used for printed electronics applications from R&D to high volume manufacturing.

11.15.17

3D Printing | Breaking News | Research Institutions

VTT: Spare Parts Go Digital (VIDEO)

"3D printing technology has reached the stage where high-quality manufacturing is possible" – VTT's Sini Metsä-Kortelainen

11.15.17

3D Printing | Breaking News

Dow Unveils New Product Line of High-Performance Materials for 3D Printing

This represents Dow’s entry into the growing 3D printing industry.

11.14.17

When It Comes to Sensors, It’s All About the Mix

Plastic and metal-organic frameworks partner for sensing and storage.

10.25.17

Danish Technological Institute Adds CeraPrinter F-Serie by CERADROP-MGI

Steps forward in nanomaterials industrial applications.

10.16.17

3D Printing | Breaking News | Financial News

HP Inc. Announces Fiscal 2018 Financial Outlook

Estimates fiscal 2018 free cash flow of at least $3 billion.

10.13.17

3D Printing | Breaking News | Research Institutions

Strangpresse Exclusively Licenses ORNL Extruder Tech for High-Volume Additive Manufacturing

Deposition rates increased from approximately four cubic inches per hour up to 2,400 cubic inches per hour.

10.13.17

3D Printing | Breaking News | Conductive Inks and Coatings

Nano Dimension Opens Nano Particle Ink Production Facility

Expands production capacities for 3D printed electronics.

10.10.17

LOPEC 2018 to Cover 3D Printed Circuits and More

Circuits and much more will no longer be printed simply on foil and other flat surfaces.

10.05.17

3D Printing | Breaking News | Research Institutions

VTT Upgrades Pilot Environment for 3D Printing of Metals

09.29.17

Optomec Showcases Aerosol Jet 3D Printers for Flexible Circuits, Sensors at NextFlex Innovation Day

Functional electronic samples printed with Aerosol Jet technology will be on display in the Optomec booth.

09.20.17

3D Printing | Breaking News | Manufacturing | Printing

TheIJC Comes to America

Inaugural US edition of this inkjet-focused event will take place April 12-13, 2018 in Chicago.

09.18.17

Optomec Aerosol Jet Systems Featured at iMAPS Workshop

Optomec was recently awarded a NASA SBIR contract for further development of an Adaptive Laser Sintering System (ALSS).

09.13.17

3D Printing | Breaking News | Sensors and Wearables

HP Brings 3D Technology to Footwear Market

FitStation powered by HP delivers individual shoe and insole recommendations, 3D printed insoles and custom footwear.

09.08.17

CPEIA Rebrands as intelliFLEX Innovation Alliance

Expand technology scope and membership of the association to include flexible, hybrid and wearable electronics.

09.06.17

3D Printing | Breaking News | Manufacturing

Optomec Showcases Aerosol Jet 3D Printers at Upcoming Conference

Will highlight flexible circuits and sensors at International Conference on Flexible and Printed Electronics 2017.

09.05.17

3D Printing | Breaking News | Printed Circuit Boards/Membrane Switches/In Mold Electronics

Jabil Adds Commercial 3D Printer from Nano Dimension

Jabil is the first customer that will receive Nano Dimension’s commercial 3D printer.

09.01.17

3D Printing | Breaking News | Sensors and Wearables

Qualcomm, Himax Technologies Announce High Resolution 3D Depth Sensing Solution

Enable computer vision for use cases such as biometric face authentication, 3D reconstruction and scene perception.

08.31.17

Optomec CEO Presents 3D Printed Sensors Solution at InterPACK Conference

Presentation highlights convergence of additive manufacturing and industrial IoT applications.

08.30.17

3D Printing | Breaking News

HP, Deloitte Join to Accelerate Digital Transformation of $12 Trillion Global Manufacturing Industry

The two companies will collaborate on the implementation of HP’s 3D printing systems in large-scale manufacturing environment

08.25.17

3D Printing | Conductive Inks and Coatings

BASF Acquires Filament Producer Innofil3D

Innofil3D BV will play a central role in BASF’s production of filaments for 3D printing.

08.18.17

3D Printing | Breaking News | Flexible and Printed Electronics

BASF 3D Printing Solutions GmbH to Start Operations in September 2017

Establishes new group company to pursue opportunities in 3D printing.

07.28.17

The University of Texas at San Antonio Adds CERADROP Hybrid 3D Digital Deposition Platform

Strengthens multifunctional electronic materials and devices research.

07.26.17

3D Printing | Breaking News | Electronic Materials | Flexible and Printed Electronics

Arkema to Invest in Bio-sourced Polyamide 11 Chain in Asia

Investing €300 million to increase production capacity by 50%.

07.14.17

3D Printing | Breaking News | Chemicals, Metals and Powders | Electronic Materials | Touch Screens

Arkema Increases Photocure Resin Production Capacity at Sartomer Affiliate in China

New production line for UV, LED and EB photocure resins, which should come on stream early 2019.

07.11.17

3D Printing | Breaking News | Electronic Materials | Research Institutions

ORNL, Polynt Composites Develop Stronger, Low Cost 3D Materials

Researchers are optimizing reactive composites like vinylester for use in large-scale additive manufacturing.

07.07.17

3D Printing | Breaking News | Manufacturing | Research Institutions | Universities

DARPA Chooses PARC, Siemens, Georgia Institute of Technology, MSU to Transform Manufacturing

Project to help manufacturers increase object complexity by 10 million times compared to current systems.

06.30.17

3D Printing | Breaking News | Manufacturing | Sensors and Wearables

Optomec Showcases Aerosol Jet Systems for 3D Printed Electronics at Sensors Expo

Cost effective printing enables smart, connected industrial and consumer products.

06.27.17

3D Printing | Breaking News | Manufacturing | Printing

Optomec Receives NASA Award for Adaptive Laser Sintering System

System will greatly reduce production time and pave the way for in-space fabrication of printed electronics.

06.27.17

Optomec Showcases Aerosol Jet 3D Printing Systems for Flexible Circuits and Sensors at FlexTech

Will highlight a groundbreaking 3D Printed Sensor application that was developed with its customer General Electric.

06.20.17

3D Printing | Breaking News

HP Expands Asia-Pacific 3D Printing Program

New 3D Printing Reference and Experience Centers launched throughout the region.

06.13.17

Optomec Teams with Lockheed, GE to Secure NextFlex Contract Award

Optomec to deliver multiple systems for printing 3D sensors, 3D antennas and 3D electronics as part of $3 million project.

06.06.17

3D Printing | Breaking News | Research Institutions

Imec, Cascade Microtech Develop First Automatic Probe System for Advanced 3D Chips

Test system enables pre-bond probing of 3D chips with large-array fine-pitch micro-bumps.

05.25.17

3D Printing | Breaking News | Manufacturing | Printing

Optomec CEO Presents at LiveWorx Technology Conference

Presentation establishes convergence of additive manufacturing and industrial IoT applications.

05.24.17

Optomec Announces Superior Results Proven in Landmark 3D Metal Additive Manufacturing Study

Leading OEMs, research institutes validate repeatability, transferability of Optomec LENS process for aerospace components.

05.05.17

Optomec Announces Improved Performance of Copper Inks for Aerosol Jet Printed Electronics

Optomec deposition and curing techniques will lower production cost, expand industrial use of 3D printed electronics.

05.03.17

NextFlex Initiates $10.5 Million Worth of Projects with Lockheed Martin, HPE and Others

Awards contracts totaling $45 million to date for developing FHE into a commercially vialable US industry.

04.27.17

3D Printing | Breaking News | Suppliers News

Optomec Showcases Aerosol Jet Systems for 3D Printed Electronics at NEPCON China

Will display next-gen 3D printed electronic devices used for consumer electronics, semiconductor packaging and IoT.

04.25.17

3D Printing | Breaking News | Flexible and Printed Electronics | Suppliers News

Optomec 3D Printers at Grand Opening of U3DP Facility in Hong Kong

Hong Kong Polytechnic owns an Optomec Aerosol Jet system for 3D printed electronics and a LENS system for 3D printed metals.

04.20.17

3D Printing | Breaking News

Mimaki USA to Preview 3D Printer Technology at International Sign Expo 2017

UV-cure inkjet printer prototype makes its US debut.

04.17.17

3D Printing | Breaking News | Flexible and Printed Electronics | Sensors and Wearables

IDTechEx Announces Winners of Launchpad

Will showcase innovations from 18 start-up companies at IDTechEx Europe.

04.12.17

Industry Support Building for CPES2017

CPES2017 is Canada’s leading event for printable, flexible and wearable electronics.

03.30.17

3D Printing | Breaking News

HP Unveils First 3D Printing Material Development Kit

Accelerates digital reinvention of manufacturing industry with open platform and 3D printing materials advancements.

03.21.17

3D Printing | Breaking News | Manufacturing | Printing | Suppliers News

Optomec Showcases Production Additive Manufacturing Systems for Metals, Electronics at AMUG

Machine Tool Series combines Optomec’s LENS Print Engine technology with CNC Vertical Milling platforms.

03.17.17

3D Printing | Breaking News | Flexible and Printed Electronics

Optomec to Feature Systems for 3D Printed Electronics at UK Advanced Packaging Conference

Will show how additive manufacturing is being used to print functional circuits onto both planar and non-planar substrates.

03.16.17

3D Printing | Breaking News

Massivit 3D to Demonstrate Opportunities of Large Format 3D Printing at ISA Sign Expo

Will show a large format 3D printed robot, illuminated fragrance bottle and a vacuum-formed sign.

03.09.17

Experience the World of Printed Electronics at LOPEC 2017

Printed electronics are increasingly finding their way into everyday lives.

03.07.17

3D Printing | Breaking News

Optomec Partners with Tongtai to Deliver Hybrid Additive Manufacturing Machines

Tongtai will integrate Optomec LENS Print Engine, add 3D metal printing capability to its AMH-350 vertical milling machine.

03.02.17

3D Printing | Breaking News | Manufacturing

Optomec Participates in NextFlex Forum on Hybrid Electronics for Smart Products

FHE holds the promise to improve healthcare and infrastructure.

02.28.17

3D Printing | Breaking News | Manufacturing | Product Releases | Suppliers News

Optomec Features Affordable Metal Additive Manufacturing Systems at LAM Conference

New Machine Tool Series combines Optomec’s LENS Print Engine technology and conventional CNC Vertical Milling platforms.

02.23.17

3D Printing | Conductive Inks and Coatings | Printing

PV Nano Cell Signs LOI for $10 Million Acquisition of DigiFlex

Will provide ability to support Additive Digital design, prototyping and mass production of electronic devices, such as PCBs.

02.14.17

Optomec Launches Asia Pacific Operations Center in Singapore

Addresses increasing demand for Optomec products and enhances support for customers and resellers in the region.

02.02.17

Optomec to Showcase 3D Printed Electronics at UK Conference

Aerosol Jet printing of flexible and stretchable interconnects to be highlighted at InnoLAE.

01.30.17

3D Printing | Breaking News | Flexible and Printed Electronics | Printing

Xerox Showcases Digital Print, Automation at Retail’s BIG Show

Showing how print innovations, analytics can springboard more memorable, personalized retail experiences.

01.16.17

3D Printing | Breaking News | Personnel | Printing

Xaar Expands 3D Business With New Xaar 3D Center and Team

New 3D team will be headed up by Professor Neil Hopkinson, inventor of HSS technology.

12.19.16

3D Printing | Breaking News | Manufacturing | Suppliers News | Universities

Optomec Receives Order for Controlled Atmosphere Hybrid 3D Printer

University of Nebraska to use LENS Hybrid 3D Printer to further industry-driven research.

12.12.16

3D Printing | Breaking News | Printing

Optomec to Present at Autodesk University

Optomec class will highlight opportunities to utilize Autodesk software to drive 3D additive manufacturing.

11.15.16

3D Printing | Breaking News | Conductive Inks and Coatings

Sartomer Launches New Generation of Solutions for 3D Printing

NextDimension is its new range of solutions for UV curable additive manufacturing.

11.08.16

3D Printing | Breaking News | Personnel | Universities

RIT Names Bruce Kahn Director of Business Development for New AMPrint Center

Former Kodak scientist will support university-corporate economic development opportunities.

11.04.16

3D Printing | Breaking News

BASF, HP Strengthen Collaboration for Production-Ready 3D Printing Materials

Accelerating development of materials for HP Multi Jet Fusion technology.

11.03.16

State Opens Additive Manufacturing and Multifunctional Printing (AMPrint) Center at RIT

Center for Advanced Technology will develop next-generation 3D-printing materials, equipment and devices.

10.26.16

3D Printing | Breaking News

Solvay Aligning Advanced Polymers with Growing Trend Toward Additive Manufacturing

Opens a new laboratory at its Research & Innovation Center in Alpharetta, GA.

10.25.16

3D Printing | Breaking News

Evonik and HP Inc. Cooperate in 3D Printing

VESTOSINT can be approved by the Food and Drug Administration for food contact.

10.20.16

IDTechEx Wearable USA Kicks Off Next Month

Wearable technology has expanded significantly over the last three years.

10.07.16

3D Printing | Breaking News

First-ever 3D Printed Excavator Project Advances Large-scale Additive Manufacturing R&D

Printed using carbon fiber-reinforced ABS plastic.

10.03.16

IDTechEx Announces Winners of Launchpad Initiative in Santa Clara

Launchpad winners will show their innovations to more than 3000 attendees.

09.28.16

3D Printing | Conductive Inks and Coatings | Energy Curing/Sintering | Research Institutions

Electron Beam Microscope Directly Writes Nanoscale Features in Liquid with Metal Ink

Scientists used the electron beam to induce palladium from a solution to deposit as nanocrystals.

09.13.16

PARC Showcases Flexible, Printed, Hybrid Electronics at NextFlex Opening

PARC is working on a wide range of projects, from sensors to wearables.

08.30.16

3D Printing | Breaking News | Film, Paper, Glass and Substrates | Sensors and Wearables | Touch Screens

Kodak Returns to Profitability in 2Q 2016

In Micro 3D Printing, Kodak continues to focus on copper mesh touch sensors.

08.15.16

3D Printing | Breaking News | Research Reports

Worldwide Spending on 3D Printing Expected to Surpass $35 Billion in 2020

IDC expects revenue to more than double the $15.9 billion in revenues forecast for 2016.

08.15.16

3D Printing | Breaking News

Evonik to Partner in HP Inc.’s Open Platform Program for New 3D Printing Materials

Will introduce new customized powder materials to the market for HP Multi Jet Fusion technology.

07.11.16

3D Printing | Breaking News

HP Delivers World’s First Production-Ready 3D Printing System

With partners such as Nike and BMW, HP takes major step to reinvent prototyping and manufacturing industry.

05.20.16

3D Printing | Breaking News

Arkema, HP Inc. to Collaborate on 3D Printing

Partnering on material development for new Multi Jet Fusion 3D Printing Solution.

05.20.16

3D Printing | Breaking News | Energy Curing/Sintering | Product Releases

Dymax Curing Systems Enhance 3D Printing

Enhance configurations for 3D post-curing applications or helps rework the model.

03.28.16

Kodak Announces Strategic Product, Technology Decisions

Kodak in talks to sell PROSPER enterprise inkjet business, will exit silver metal mesh business.

03.17.16

3D Printing | Breaking News

KODAK and Carbon Announce Joint Development Agreement

Will work to develop new offerings for additive manufacturing.

03.14.16

3D Printing | Breaking News | Conductive Inks and Coatings | Flexible and Printed Electronics

Nano Dimension to Discuss 3D Printing of PCBs

Will present at IPC APEX EXPO 2016.

03.01.16

3D Printing | Breaking News | Conductive Inks and Coatings | Universities

Nano Dimension Announces New Collaboration with Tel Aviv University

Seeks to enable 3D printing of sensors using nickel nanoparticles.

02.25.16

2016FLEX Conference to Highlight Eco-System Developments

Conference is expected to attract more than 600 experts in flexible hybrid electronics.

02.22.16

3D Printing | Chemicals, Metals and Powders | Electronic Materials

Evonik to Expand Its Position in Powdered Polyamide 12

Offers strong growth potential, especially in 3D printing.

02.12.16

Fraunhofer ISC Presents Developments for Micro- and Nanoscale at nano tech 2016

Fraunhofer ISC develops customized coatings based on inorganic materials and hybrid polymers for roll-to-roll processing.

01.22.16

2016FLEX Offers Wide Range of Short Courses

Topics include printed electronics, flexible hybrid electronics, 3D printing and more.

01.20.16

3D Printing | Breaking News | Personnel

Xaar Names Professor Neil Hopkinson Director of 3D Printing

He is credited as being the original inventor of the transformational High Speed Sintering (HSS) technology.

01.08.16

3D Printing | Breaking News | Universities

Ultimaker Launches Two New 3D Printers at CES 2016

Exhibits Ultimaker 2+, Ultimaker 2 Extended+ and shares market vision for upcoming year.

01.08.16

Registration Discount for 2016FLEX Ends Jan. 8

Conference theme is ‘Building the Innovation Ecosystem.’

01.05.16

3D Printing | Breaking News | Conductive Inks and Coatings

Nano Dimension Files Patent For Printing Multimaterial 3D Objects

Patent to cover embedded electronic conductors.

01.04.16

3D Printing | Breaking News | Conductive Inks and Coatings | Flexible and Printed Electronics | Printed Circuit Boards/Membrane Switches/In Mold Electronics

Nano Dimension Brings Professional 3D Printing of Electronics to CES 2016

DragonFly 2020 3D Printer, the world’s first desktop-sized 3D printer designed specifically for PCBs, will be shown.

12.15.15

3D Printing | Breaking News | Conductive Inks and Coatings | Flexible and Printed Electronics | Suppliers News

Nano Dimension Files Patent For Proprietary Copper Ink

Offers the ability to print copper with industrial 3D digital printers.

11.30.15

3D Printing | Breaking News | Conductive Inks and Coatings | Flexible and Printed Electronics | Suppliers News

PV Nano Cell Wins IDTechEx Award for Best Development in Materials for 3D Printing

Company recognized for its portfolio of nanometric conductive inks, enabling mass production of printed electronics.

11.27.15

XENON Corporation Launches S-2200, X-1100 Systems

S-2200, X-1100 sintering tools bring flexibility, modularity to formulators.

11.20.15

MGI’s CERADROP 3D Printing Subsidiary Exhibits at PE USA 2015, UC Berkeley Research Lab

Performed live production demonstrations of the X-Series digital deposition system.

11.20.15

Nano Dimension Launches World’s First 3D Printer Dedicated to Ultra-Rapid Prototyping of PCBs

DragonFly 2020 is first 3D printer for professional multilayer PCB.

11.19.15

BASF, LSS, and Farsoon Develop Solutions for 3D Parts Printed by Selective Laser Sintering

New material features high strength and heat stability.

11.19.15

Nano Dimension to Showcase World’s First 3D Printer for Electronics at PE USA 2015

The company will also demonstrate the AgCite line of silver nanoparticle conductive inks for inkjet deposition.

11.13.15

3D Printing | Breaking News | Flexible and Printed Electronics

drupa 2016 to Showcase Printed Electronics, 3D Printing, Production Inkjet Printing

May 2016 event has 80 percent of exhibition space been booked

Dave Savastano 11.01.15

3D Printing | Breaking News | Conductive Inks and Coatings | Personnel | Suppliers News

Nano Dimension Expands Presence in the US

Ofir Baharav joins Board of Directors.

11.01.15

3D Printing | Breaking News | Conductive Inks and Coatings | Flexible and Printed Electronics | Suppliers News

Nano Dimension Introduces AgCite Highly Conductive Silver Nanoparticle Inks

AgCite inks sinter at low temperatures and are suited to a broad range of substrate surfaces.

10.24.15

3D Printing | Breaking News | Printing | Universities

MIT’s MultiFab Presents Challenge to 3D Printer Manufacturers’ Models

MultiFab is a low-cost 3D printer that can combine up to 10 different resins in one part.

09.01.15

3D Printing | Breaking News | Manufacturing | Personnel | Printing

Stratasys Names Andy Middleton President, EMEA

Middleton will oversee integration of MakerBot Europe within Stratasys Business Unit EMEA.

06.08.15

IDTechEx Printed Electronics Europe 2015 Names Award Winners

Light Tape, Vittoria, Konica Minolta, DuPont Teijin Films, Technische Universitaet Muenchen receive honors

05.01.15

CERADROP, an MGI Company Exhibits at PE Europe 2015

Will showcase CeraPrinter range, from R&D to 24/7 manufacturing

04.28.15

VTT Creates Efficient Method of Producing Metallic Nanoparticles

Can be used in conductive and magnetic inks, medical diagnostics and drug dosing

04.20.15

3D Printing | Energy Curing/Sintering | Printing | Universities

SUNY ESF Opens Registration for Radiation Curing Program

Includes two short courses, three advanced courses on UV and EB technology

01.12.15

3D Printing | Breaking News | Film, Paper, Glass and Substrates | Touch Screens

Kodak Sets New Structure to Drive Growth

Company will have five market-focused business divisions

Dave Savastano 12.04.14

Ceradrop MGI Group, UC Berkeley EECS Announce Equipment Vendor Collaborations

EECS adds advanced X-Series CeraPrinter, software solutions suite from Ceradrop

Dave Savastano 11.20.14

3D Printing | Breaking News | Flexible and Printed Electronics | Printing | Suppliers News

MGI's Ceradrop to Demonstrate Smart 3D Printing Tool at Printed Electronics USA 2014

Will be giving live demonstrations of the CeraPrinter, a high accuracy advanced materials deposition inkjet tool

Dave Savastano 11.19.14

3D Printing | Breaking News | Conductive Inks and Coatings | Energy Curing/Sintering | Universities

Registration Begins for SUNY-ESF/RadTech's Online Radiation Curing Program

Online program offers professional development short courses, advanced courses

Dave Savastano 11.05.14

3D Printing | Breaking News | Displays and Lighting | Flexible and Printed Electronics

HP Unveils Future of 3D Printing, Immersive Computing as Part of Blended Reality Vision

HP 3D Print Technology to set standards in quality, performance and speed with break-through economics

Dave Savastano 10.30.14

3D Printing | Breaking News | Energy Curing/Sintering | Flexible and Printed Electronics | Suppliers News

NovaCentrix and nScrypt Team on FlexTech Alliance Contract for Advanced 3D Printing Tool

Tool will be able to additively build integrated hybrid circuits on 3D surfaces, as well as devices on flexible, low temperature and rigid planar substrates

Dave Savastano 10.23.14

3D Printing | Breaking News | Flexible and Printed Electronics

International Industry for Printed Electronics Meets at LOPEC 2014

Market for printed electronics is on the move

Dave Savastano 02.19.14

IDTechEx Announces Printed Electronics USA 2013 Award Winners

Cambrios, Imprint Energy, Rolith, Harvard among honorees

Dave Savastano 12.03.13

MGI Announces Acquisition of CERADROP, French leader in 3D-Printed Electronics

Specializes in design and manufacturing of high-end professional inkjet printing systems for the printed electronics industry

David Savastano 09.24.13

3D Printing | Breaking News | Universities

NIST Awards $7.4 Million in Grants for Additive Manufacturing Research

Benefits include producing goods quickly and on-demand, with greater customization and complexity and less material waste

Bridget Klebaur 09.19.13

3D Printing | Breaking News

ITRI Establishes Second Presence in Europe

ITRI, TNO sign agreement to jointly promote 3D Printing Technology International Alliance (PENROSE Project)

Bridget Klebaur 06.28.13

3D Printing | Breaking News | Flexible and Printed Electronics

Optomec Showcases 3D Printers for Metal and Electronic Applications at RAPID

New metal printer, new high volume production process for electronics Introduced

Bridget Klebaur 06.27.13

3D Printing | Breaking News

CPI Leads the Way for High Value Engineering in the North East of England

One of the leading areas for high value engineering

Bridget Klebaur 12.06.12

3D Printing | Breaking News | Flexible and Printed Electronics

3D Printing is Merged with Printed Electronics

Smart Wing created for UAV model demonstrates new technology from Stratasys and Optomec

Kerry Pianoforte 03.26.12

3D Printing | Breaking News | Flexible and Printed Electronics

Optomec Aerosol Jet System Featured at IDTechEx PE USA Conference

Optomec will highlight Aerosol Jet capabilities for 3D interconnect and conformal printing

Kerry Pianoforte 12.01.11

3D Printing | Breaking News | Flexible and Printed Electronics

Advanced Printing Conference Brings Together Global Leaders

Printed electronics, digital printing among key topics of IS&T conference

Dave Savastano 08.28.11

2020 CES Highlights Latest Advances in Printed, Flexible Electronics

Smart packaging, wearables, sensor, in-mold electronics and display manufacturers are among honorees at the show.

David Savastano 01.20.20

CPES2018 to Highlight Growth in Flexible and Hybrid Electronics

Conference is set for May 23-24 at Centennial College’s Conference Centre in Toronto.

David Savastano 05.09.18

3D Printing | Energy Curing/Sintering | Flexible and Printed Electronics

A Look at Flexible Electronics: Printed Electronics Now Interview with Dr. Mike Idacavage

Dr. Idacavage discusses opportunities in flexible electronics, 3D printing and more.

David Savastano and Kerry Pianoforte 05.02.18

LOPEC 2018 Celebrates 10 Years While Looking Ahead to the Future

OE-A's leaders note 'enormous' changes over the years, as new markets like sensors, wearables and more emerge.

David Savastano 03.14.18

2018FLEX to Feature Newest Developments in Flexible Hybrid Electronics

With more than 600 attendees, 100+ market and technical talks and 60 exhibitors, 2018FLEX looks to be largest in its history.

David Savastano 01.10.18

Flexible and Hybrid Electronics Highlighted at IDTechEx Live 2017!

New technologies are discussed for sensors, displays, RFID and more.

David Savastano 11.22.17

IDTechEx Live! 2017 Highlights Progress in Flexible and Printed Electronics

Commercial successes in key markets such as sensors, wearables are fueling growing optimism.

David Savastano 11.16.17

PE USA 2017 to Offer Look into Flexible and Hybrid Electronics

Speakers from NASCAR, Samsung, Google, OSRAM, Porsche and Mercedes Benz will be on hand.

David Savastano 11.08.17

intelliFLEX Innovation Alliance Looks to Grow Canada’s Flexible Electronics Industry

CPEIA’s rebranding brings new focus to growing segments, including wearables, smart packaging and connected homes.

David Savastano 09.13.17

3D Printing | Flexible and Printed Electronics | Lab and Testing | Printed Circuit Boards/Membrane Switches/In Mold Electronics

Voltera’s V-One Earns 2017 Commercialization Award from CPEIA

Additive manufacturing machine reduces prototyping time for PCBs down to days and even hours.

David Savastano 08.30.17

2017FLEX Highlights Opportunities in Flexible Hybrid Electronics

With more than 600 attendees pre-registered and a sold-out exhibition hall, 2017FLEX shows increasing interest in technology.

David Savastano 06.07.17

NextFlex Completes Project Call 2.0 with Five New Awards

Next step is to develop new manufacturing techniques for flexible hybrid electronics.

David Savastano 05.03.17

LOPEC 2017 Comes to Successful Conclusion

OE-A reports major growth in attendance, exhibitors and exhibition space, as well as increasing interest from end-users.

David Savastano 04.05.17

LOPEC 2017 Examines Key Markets, Technologies

Sessions will include Flexible Displays & Lighting, Wearable Electronics, Automotive & Aerospace, IoT, Devices and more.

David Savastano 03.29.17

Growth of Flexible and Printed Electronics is Focus of LOPEC 2017

Record number of exhibitors, exhibitor space and demonstrators are among signs the technology is moving forward.

David Savastano 03.29.17

LOPEC 2017 Highlights Opportunities for Flexible and Printed Electronics

Samsung, AU Optronics are among the industry leaders that will discuss the possibilities for the technology.

David Savastano 03.01.17

LOPEC 2017: Printed Electronics for Our Health

Printed electronics is finding new opportunities in the healthcare field.

Dr. Ton van Mol 12.07.16

3D Printing

PE USA 2016 Shows Growth of Flexible Electronics

Speakers, exhibitors share new technologies with more than 3,300 attendees.

David Savastano 11.23.16

3D Printing

PE USA 2016 Looks at Future of Flexible Electronics, Wearables, Sensors and More

Leading corporations and young start-ups alike share their vision of the realities and possibilities of technology.

David Savastano 11.21.16

3D Printing

Major Corporations to Discuss Opportunities at PE USA 2016

Google, Unilever, Intel, Coca-Cola, Toyota, Caterpillar and Porsche are among the major brand owners presenting at the show.

David Savastano 11.17.16

PE USA 2016 Will Emphasize Gains in Flexible and Printed Electronics

Unilever, Coca-Cola, Google, Intel, Toyota, Porsche and other leading end users are among the presenters this year.

David Savastano 10.19.16

3D Printing

Continuous Composites is Working to Revolutionize 3D Printing

Continuous Scaled Manufacturing allows 3D printing of continuous fiber at speeds of up to 1,200 inches per minute.

David Savastano 08.03.16

3D Printing | Sensors and Wearables | Universities

Sensoria Introduces Heart Sentinel Monitoring Algorithm

New sensor, app monitors for cardiac arrest while also offering virtual training advice.

David Savastano 06.27.16

CPES2016 Brings Together Canadian PE Industry

Attendees discuss new technologies, end use applications.

05.11.16

3D Printing | Flexible and Printed Electronics | Nanomaterials | Photovoltaics

Printed Electronics Europe 2016 Highlights New Technologies

New possibilities for printed electronics, wearables, sensors, IoT and more will be the focus of today’s presentations.

David Savastano 04.28.16

3D Printing | Consulting | Displays and Lighting | Flexible and Printed Electronics

Printed Electronics Europe 2016 to Showcase Opportunities for Technology

LG Display, Jabil, NASA, Toyota and Google will be among highlights during today’s conference sessions.

David Savastano 04.27.16

Printed Electronics Europe 2016 Highlights Industry’s Expansion

Emphasis of upcoming conference is how companies are making money.

David Savastano 04.20.16

Audi, adidas and Sumitomo to Highlight Opening Session of LOPEC 2016

Companies, researchers will present latest developments, applications.

David Savastano 04.05.16

3D Printing | Energy Curing/Sintering

RadTech 2016 to Focus on End Uses, New Technologies

Leaders from P&G, Ford Motor, Toyota, PepsiCo and Nestlé will provide insights on using energy curable technologies.

David Savastano 03.30.16

2016FLEX to Focus on Latest Advances in Flexible and Printed Electronics

More than 500 attendees, 120 presentations expected at upcoming conference Feb. 29-March 3 in Monterey, CA.

David Savastano 02.10.16

Universities Undertake Unique Projects for Flexible and Printed Electronics

Universities worldwide are researching potential applications for flexible and printed electronics.

David Savastano 02.03.16

Printed Electronics Now’s Top Breaking News Stories, Blogs, Slideshows and More for 2015

Printed Electronics Now’s top features span a wide range of topics during 2015.

David Savastano 01.19.16

3D Printing | Flexible and Printed Electronics | Manufacturers News | Sensors and Wearables | Touch Screens

Qi2 Merges Printed Electronics, 3D Printing for Aviation Sensors

Successfully develops corrosion, ice detection sensors for aircraft.

David Savastano 12.16.15

PV Nano Cell Puts Focus on Additive Manufacturing

Company sees potential for conductive inks for 3D and inkjet printing.

David Savastano 12.02.15

PE USA 2015 Highlights Latest Innovations

Attendees learn about new developments during talks and on exhibit floor.

David Savastano 11.25.15

3D Printing | Conductive Inks and Coatings | Flexible and Printed Electronics | Nanomaterials | Printing

Nano Dimension Merges Worlds of 3D Printing, Printed Electronics

With products ranging from nanoparticle inks to 3D printers and software, company is combining two growing fields.

David Savastano 10.28.15

New Growth is Focus of Upcoming Printed Electronics USA 2015

Speakers from Coca-Cola, Colgate-Palmolive, HP and Bayer Healthcare among those who will discuss new opportunities.

David Savastano 10.14.15

3D Printing | Conductive Inks and Coatings | Flexible and Printed Electronics | Graphene, Perovskites and Carbon Nanotubes | Photovoltaics

Raymor Industries’ Scalable IsoSol-100 CNTs Reach Commercialization

Developing scalable process in conjunction with NRC opens doors to printed transistor applications.

David Savastano 05.27.15

Printed Electronics Europe 2015 to Showcase PE’s Growth

Qualcomm, United Technologies, Ericcson and Jaguar among the keynote speakers at PE Europe 2015

David Savastano 04.08.15

LOPEC 2015 Will Showcase New Applications and Technologies

Wearables, automotive, medical uses, displays and more are among the highlights of this year’s conference.

David Savastano 02.18.15

Printed Electronics Now’s Top 10 Breaking News Stories for 2014

Printed Electronics Now covered many stories online during 2014. These breaking news stories drew the highest readership.

David Savastano 01.07.15

3D Printing | Breaking News | Flexible and Printed Electronics

Printed Electronics USA 2014 Heads into Closing Session

Sessions cover PE, Wearables, Graphene, Internet of Things, 3D Printing and more

Dave Savastano 11.20.14

3D Printing | Breaking News | Displays and Lighting | Flexible and Printed Electronics | Photovoltaics

End-Users to Headline Opening Session of Printed Electronics USA 2014

Keynote speakers from Samsung, adidas, Jaguar Land Rover, Hallmark and Sylvania will discuss experiences with flexible and printed electronics.

Dave Savastano 11.19.14

3D Printing | Flexible and Printed Electronics | Photovoltaics

Printed Electronics USA 2013 Focuses on Commercialization of PE

David Savastano 10.30.13

3D Printing | Flexible and Printed Electronics | Photovoltaics

FOLLOW: